Download New Latest (May) Cisco 352-001 Actual Tests 71-80

Ensurepass

 

QUESTION 71  (Topic 1)

 

When creating a design plan for IPv6 integration, you decide to use stateless encapsulation of IPv6 packets into IPv4 tunnels between subscriber CPEs and a border relay. Which deployment technique allows for this functionality?

 

A.

6rd

B.

Dual-Stack Lite

C.

4rd

D.

DSTM

 

Answer: A

 

 

QUESTION 72  (Topic 1)

 

You are the SAN designer for the ABC Company. Due to budget constraints, there is increased pressure by management to further optimize server utilization by implementing virtualization technologies on all servers and increase virtual machines density. Faced with some SAN challenges, the server team requests your help in the design and implementation of the SAN in the new virtualized environment.

 

In which two ways can NPIV be used in your proposed design? (Choose two.)

 

A.

NPIV is used to assign multiple FCIDs to a single N Port.

B.

NPIV is used to define and bind multiple virtual WWNs (VIs) to a single physical pWWN.

C.

You recommend NPIV so that hosts can be members of different zones.

D.

NPIV can be used to allow multiple applications on the same port to use different IDs in the same VSAN.

 

Answer: AD

 

 

QUESTION 73  (Topic 1)

 

When creating a network design that routes an IGP over L2VPNs, with which device does the remote CE router form an IGP adjacency?

 

A.

the hub site PE router

B.

the hub site CE router

C.

the directly connected PE router

D.

The IGP will not establish adjacency over the MPLS network.

 

Answer: B

 

 

QUESTION 74  (Topic 1)

 

Your enterprise customer has asked where they should deploy flow monitoring in their network to monitor traffic between branch offices. What is your design recommendation?

 

A.

at the edge of the network so that user traffic will be seen

B.

at the central site, because all traffic from the remotes will be seen there.

C.

in the core, because all traffic will be seen there

D.

in the data center, because all user traffic will be seen there

 

Answer: B

 

 

QUESTION 75  (Topic 1)

 

Refer to the exhibit.

 

 

 

Free VCE & PDF File for Cisco 352-001 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …

 

In this design, which technology would provide for the best use of resources to provide end-to-end Layer 2 connectivity?

 

A.

MSTP

B.

PAgP

C.

Multichassis EtherChannel

D.

LACP

 

Answer: C

 

 

QUESTION 76  (Topic 1)

 

Voice traffic between two campus enterprise networks is growing. The network designers decide to add a second 10-Mb Metro Ethernet service parallel to their original 10-Mb service in order to provide more bandwidth and diversity. The QoS profile will be the same on the new 10-Mb service due to the voice stability on the first Metro Ethernet link. When the second link is added to the OSPF domain, which traffic design consideration would have the most impact on the voice traffic when both links are active?

 

A.

per-destination IP address basis

B.

per-flow basis

C.

per-packet basis

D.

per-source IP address basis

 

Answer: C

 

 

QUESTION 77  (Topic 1)

 

In a large enterprise network with multiple data centers and thousands of access devices, OSPF is becoming unstable due to link flapping. The current design has the access devices multihomed to large aggregation routers at each of the data centers. How would you redesign the network to improve stability?

 

A.

Add a layer of regional Layer 3 aggregation devices, but leave the ABR function on the data center aggregation routers.

B.

Add a layer of regional Layer 2 aggregation devices, but leave the ABR function on the data center aggregation routers.

C.

Add a layer of regional Layer 3 aggregation devices and move the ABR function to the regional aggregation device.

D.

Add a layer of regional Layer 2 aggregation devices and move the ABR function to the regional aggregation device.

 

Answer: C

 

 

QUESTION 78  (Topic 1)

 

A company wants to connect two data center sites using a hub-and-spoke design with 2000 remote sites. One design consideration is the requirement to transfer MPLS packets over the public Internet. In addition, one router at each site should be used, and the MPLS packets must be encapsulated inside IP packets because the public Internet cannot transfer native MPLS packets. Which feature can be used to simplify the network design?

 

A.

GET VPN can be used to encrypt the MPLS packets with IPsec.

B.

DMVPN can be used to build up GRE tunnels dynamically with MPLS encapsulation inside.

C.

L2TPv3 can be used to encapsulate the MPLS packets.

D.

Site-to-site IPsec without GRE can be used to encapsulate the MPLS packets.

E.

PPPoE can be used to encapsulate the MPLS packets.

 

Answer: B

 

 

QUESTION 79  (Topic 1)

 

You are tasked with implementing a 1000-phone remote access solution, where phones will traverse a WAN edge router. Assuming all of the following features are supported in a hardware-assisted manner, which of the following will have the most detrimental impact on the delay of the packet?

 

A.

encryption

B.

stateful firewall

C.

MPLS encapsulation

D.

GRE encapsulation

 

Answer: A

 

 

QUESTION 80  (Topic 1)

 

You are working on a network design plan for a company with approximately 2000 sites. The sites will be connected using the public Internet. You plan to use private IP addressing in the network design, which will be routed without NAT through an encrypted WAN network. Some sites will be connected to the Internet with dynamic public IP addresses, and these addresses may change occasionally. Which VPN solution will support these design requirements?

 

A.

GET VPN must be used, because DMVPN does not scale to 2000 sites.

B.

DMVPN must be used, because GET VPN does not scale to 2000 sites.

C.

GET VPN
must be used, because private IP addresses cannot be transferred with DMVPN through the public Internet.

D.

DMVPN must be used, because private IP addresses cannot be transferred with GET VPN through the public Internet.

E.

GET VPN must be used, because DMVPN does not support dynamic IP addresses for some sites.

F.

DMVPN must be used, because GET VPN does not support dynamic IP addresses for some sites.

 

Answer: D

 

Posted in Uncategorized