Which network topology is most closely associated with FDDI?
B. token passing bus
D. extended star
Which layer of the OSI model is associated with Token Ring Media Access Control?
D. data link
When deploying 10BASE-2 Ethernet, which type of connector is used?
When deploying 10BASE-2 Ethernet, what is the maximum cable length?
A. 100 meters
B. 100 feet
C. 150 meters
D. 150 feet
E. 185 meters
F. 185 feet
How many IP address ranges are specified in RFC 1918?
A. 1 in Class A, 2 in Class B, and 4 in Class C
B. 2 in Class A, 4 in Class B, and 8 in Class C
C. 4 in Class A, 8 in Class B, and 16 in Class C
D. 1 in Class A, 16 in Class B, and 256 in Class C
What is required to allow devices that are using RFC 1918 addresses to communicate over the Internet?
A. A private to public VLAN must be defined on the Internet border device.
B. The Internet firewall must permit RFC 1918 addresses.
C. VLAN translation is required on the Internet border device.
D. Network address translation is required on the Internet border device.
What is the addressing format of IPv6?
A. 48-bit dotted decimal
B. 48-bit colon-delimited hexadecimal
C. 64-bit dotted decimal
D. 64-bit colon-delimited hexadecimal
E. 128-bit dotted decimal
F. 128-bit colon-delimited hexadecimal
Which statement describes the function of the OSI transport layer?
A. It segments data from the system of the sending host and reassembles the data into a data stream on the system of the receiving host.
B. It provides the connectivity and path selection between two host systems that may be located on geographically separated networks.
C. It defines how data is formatted for transmission and how access to the physical media is controlled.
D. It establishes, manages, and terminates sessions between two communicating hosts.
Which transport protocol requires a three-way handshake to establish a new connection?
What is the subnet mask for the network 172.16.0.0/21?
Download LatestCCNA Data Center 640-911 Real Free Tests , help you to pass exam 100%.